No announcement yet.

Vector Sequencer : LATEST FIRMWARE

This topic is closed.
This is a sticky topic.
  • Filter
  • Time
  • Show
Clear All
new posts

  • Vector Sequencer : LATEST FIRMWARE

    The most recent firmware for the Vector Sequencer is 1.4.14, details here:

    The manual has been updated for version 1.4:

    Vector Sequencer Firmware Update Instructions

    • Download and un-zip the Vector firmware file (

    • Press and hold the Shift button while powering up the Vector to enter USB Disk mode.

    • Use a USB ‘A to B’ cable to connect the Vector to your computer. After a few seconds, the SD Card for the Vector will show up as a new disk.

    • Unzip On a Mac, the Finder may do that for you. Do not double-click on VECTOR.BIN, which the Finder will try to de-compress into something not useful.

    • Make sure the filename is exactly VECTOR.BIN, and copy it to the root directory of Vector’s SD Card – Delete

    or move any previous VECTOR.BIN firmware files.

    • Now is also a good time to backup your Vector's PROJECT directory.

    • Unmount/Eject the Vector’s SD Card from your computer, and power off your eurorack system.

    • Hold down the Rec button on the Vector while powering up your system.

    • Press Next to load the new Firmware, which takes about 20 seconds.

    • Verify the Firmware is the correct version in Globals -- first page, 2nd OLED, top-left corner.
    Last edited by jim; 06-14-2020, 07:20 PM.